BLLVL - EA 956 PART A
- MSDS: BLLVL
- Manufacturer: DEXTER HYSOL AEROSPACE INC DIV OF EXTER CORP
- Product Name: EA 956 PART A
- National Stock Number: 8040-00-463-7042
Product Identification
Product ID:EA 956 PART A
MSDS Date:04/10/1990
FSC:8040
NIIN:00-463-7042
Kit Part:Y
MSDS Number: BLLVL
Responsible Party
PITTSBURG, CA 94565-3237
US
Emergency Phone: 510-458-8000
Info Phone: 510-458-8000
Preparer: SUZANNE FRANZ
Cage: 33564
Contractor
Telephone: 202-483-7616
Cage: 33564
Ingredients
EPOXY RESIN SYSTEM
Fraction By Weight: NA
4-GLYCIDYLOXY-N,N-DIGLYCIDYLANILINE
CAS: 5026-74-4
Fraction By Weight: < 65%
< 10 G/L
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE SKIN IRRITATION AND POSSIBLE
ALLERGIC REACTIONS. PROLONGED AND REPEATED CONTACT MAY CAUSE
SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTIONS.
Effects of Overexposure:SKIN RASH, IRRITATION.
First Aid
First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER. WASH SKIN
THOROUGHLY WITH SOAP AND WATER, RUBBING ALCOHOL OR HAND CLEANER. DO
NOT USE SOLVENTS. REMOVE SOILED CLOTHING AND WASH BEFORE REUSE. IF
IRRITA TION PERSISTS, SEE PHYSICIAN.
Fire Fighting
Flash Point Method:TOC
Flash Point:>300F,>149C
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER OR WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.
Accidental Release
Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS.
Handling
Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTION. FOLLOW RECOMMENDED CURING SCHEDULE. STORE AT ROOM
TEMPERATURE (77F) FOR 12 MONTHS.
Other Precautions:SURFACES TO BE BONDED. FAILURE TO OBSERVE CAUTIONS
MAY RESULT IN EXCESSIVE HEAT BUILD-UP WITH THE RELEASE OF TOXIC
GASES.
Exposure Controls
Respiratory Protection:NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Supplemental Safety and Health
KEY1:N1. KIT CONSISTS OF TWO PARTS. SEE PNI A, B OR E FOR OTHER PART.
Chemical Properties
HCC:B3
Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:<0.01
Vapor Density:NIL
Spec Gravity:> 1
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:AMBER LIQUID WITH SLIGHT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:NA
Hazardous Decomposition Products:CO, NO2, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIX RESIN/CURING AGENT IN
BATCHES GREATER THAN 1 LB TOTAL. DO NOT HEAT MIXED ADHESIVE ABOVE
100F UNLESS CURING
Disposal
Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO
FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.